-
SKU: 21180
TIRE INFLATOR DIGITAL PORTABLE
Stark Portable 12 Volt Inflator with Gauge has a powerful motor that gets the job done quickly at 1.06 CFM, and can fill a flat tire within minutes without the excess noise and vibration of other inflator models on the market. Keep it in the back of your trunk as part of your emergency roadside kit, or keep it in your garage to fill car, truck, bike, trailer, and RV tires and other sports, exercise, or camping equipment.
- Additional attachment nozzles you would be hard pressed to find something that this compressor cannot inflate, from the heavy-duty, like car tires, to the delicate, such as a beach ball, it is perfectly equipped to achieve the perfect pressure for any situation, outdoors or indoors
- Air pump will automatically turn off when it reaches its preset value. It is connected via a 12-Volt port to the vehicles cigarette lighter port and the pump itself has a long enough cord to reach all of your vehicles tires
- Digital display is easy to read and illuminates even in the dark for ease of use in whatever environment you might get a puncture
- Pack with a 120-Watt powerful metal motor delivers inflation at a rate of 30 L/min, inflating a tire rated at 30 psi in 3-minutes
- Premium material protector to guard display screen and durable metal body grounded by anti-vibration rubber feet to prevent unwanted movement
- Working voltage: DC 12-Volt
- Rating power: 120-Watt
- Inflating speed: 1.06 cfm
- Min. Amp: 10 Amp
- Maximum Amp: 15 Amp
- LED flashlight: bright torch
- Display unit: KPA, PSI, BAR, KG/CM
- Overall Dimension: 4 in. W x 8 in. L x 6-3/4 in. H
- Package content: air compressor, adapter set, ball needle, spare fuse, manual
-
SKU: 58051
UNDER HOIST STAND TRIPOD 2TON
- Built with the Best Components – From the highest grades of rugged steel to the long lasting, corrosion-resistant lead-free paint finish, and every part in between, use quality components built to exacting standards to deliver top performance and reliability
- Extra Support – Engine parts are extremely heavy and working on a freely supported engine is quite dangerous without the correct precautions. But this 2-ton capacity stand provides the muscle and dependability expected from an extra point of support. A large 24in. x 24in. tripod base adds load stability from the ground up
- Right Height For Your Job – With a 48-3/4in. to 84in. lift range, this hoist stand achieves the heights you need to easily get underneath a part or hold it up and out of the way. The all-thread screw rod allows you to make the fine adjustments you need to obtain the perfect working height
- Easy Up, Even Toting A Load – The handle of the stand incorporates a thrust bearing that makes it easy to turn, even under the extreme pressures of a heavy load. And the large saddle design cradles the work-piece, allowing the stand to be properly positioned underneath the load
- Use It Day In And Day Out – The high-position hoist stand is the perfect choice for everyday vertical lifting and support in automotive and repair shops. It also excels in situations where a combination of sleek design and superior strength is desirable.
-
SKU: 40447A
UNDERHOOD LIGHT CORDLESS 202SMD
- Charger: UL and CUL approved, 4.2V 2A
- Battery: 3.7V 8,000mah li-ion rechargeable battery
- With high and low switch
- High switch run time: 3 hours
- Low switch run time: 6 hours
- Charge time: 4 hours
- High switch brightness: 1100- 1300 lumens
- Low switch brightness: 550- 650 lumens
- PC tube construction
- Steel pipe light holder is adjustable from 47″ to 76″
- Housing Material: TPR
- Power Switch: rocking type
- Protections: short circuit protection and over charge protection
- Content: 1 pc work light, 1 pc charger, 1 pc instruction
-
SKU: 71012
VACUUM WET & DRY 3 PEAK HP 8 GALLON
XtremepowerUS 8Gal. stainless steel wet/dry vac is designed to deliver high performance through its 3 HP motor that easily handles tough clean-up tasks. Include accessories (hoses, wands, and accessories) A stainless steel drum construction and caster feet with accessory storage, and you have a wet/dry vac that meets the demands of Pros, DIYers and homeowners
Features:
- Our vacuum can use in dry/wet vacuum also it can be used as the blower to clean the leaf/dust/chipping. Just need connect the wand and the Brush, one start button can start your work!
- Powerful 3 HP provides strong suction and air blow; The vacuum cleaner is equipped with a variety of working accessories to meet various cleaning needs; Our all-in-one multi-surface wet/dry vacuums and accessories are created for power, efficiency and convenience
- HEPA Filtration System Effectively prevent dust particles from remaining in the air, and prevent dust from entering the motor blades, keeping your wet and dry vacuum cleaners running continuously and efficiently
- On Board Accessory storage convenient and space-saving accessories storage method allows you to easily replace accessories as needed for each use
- Produce with pure Copper wire motor, it generate the 1200W strong suction & blow force to apply the clean work, also inside it with the buoy technology double assure the operation safety
Specification:
- Function: Wet / Dry / Blower
- Voltage: 120
- Power: 1200W / 3HP
- Vacuum Capacity: 8Gal
- Max Airflow: 215CFM
- Max Blowing Speed: 230MPH
- Hose Length: 7ft
- Power Cord: 13ft
- Overall Dimension:
- Certification: ,
Package Content:
- Wet Dry Blower Vacuum
- 3pc Extension Bars
- Accessories Set
- Dust Filter Bag
- Storage Kit
-
SKU: 71011
VACUUM WET & DRY 5.5 PEAK HP 5 GALLON
5gal. stainless steel wet/dry vac is designed to deliver high performance through its 5.5 peak HP motor that easily handles tough clean-up tasks. Include accessories (hoses, wands, and accessories) A stainless steel drum construction and caster feet with accessory storage, and you have a wet/dry vac that meets the demands of Pros, DIYers and homeowners
Features:4-layer filtration can filter out dust and collect it in the dust bucket, discharge clean air to prevent secondary pollution. Safety buoy technology will Automatically turn off the power when the water level in the bucket exceeds the boundary to protect the motor better. Wet dry vac equipped with 7 ft. X 1.25-inch resistant premium hose and 3-1.3 FT extension bars to easily clean 20FT diameter areas without move vacuum. Convenience features include comfort grip drum carry handles for easy lifting, large ergonomic top carry handle, large power switch and swivel casters. The tank is made of high-quality stainless steel, no need to worry about rust and damage, Internal uses pure copper motor to assure high performance, maximum power and persistence, increase the service life of 75%. Strong Suction and Various Accessories – Powerful 5.5 HP provides strong suction and air blow, The vacuum cleaner is equipped with a variety of working accessories to meet various cleaning needs, Our all-in-one multi-surface wet/dry vacuums and accessories are created for power, efficiency and convenience
Specification:
- Color: Red/Black
- Function: Wet / Dry / Blower
- Voltage: 120v
- Amp: 8.5
- Power: 1000W (5.5hp Peak)
- Vacuum Capacity: 5Gal
- Max Airflow: 215CFM
- Max Blowing Speed: 230MPH
- Hose Length: 7ft
- Power Cord: 13ft
- Overall Dimension: 14-1/2″(L) x 15″(W) x 18-3/4″(H)
- Certification: Listed
-
SKU: 55200
WELDING MAGNET 25LB ARROW
This magnetic weld holder with up to 25lbs of load is designed to work as an extra hand. It enables fast and accurate holding of any ferrous object. It is ideal for use a holder and positioner in welding, soldering, marking off, pipe installation. Holding capacity: 25LB. Holds materials at 45, 90 and 135 degrees. For easy soldering. Ideal for welding & metalworking. Magnets are used to hold jigs together in welding or connecting operation.
Holding capacity: 25LB
Holds materials at 45, 90 and 135 degrees
For easy soldering
Ideal for welding & metalworking
Magnets are used to hold jigs together in welding or connecting operation -
SKU: 55201
WELDING MAGNET 50LB ARROW
- Provide the Perfect Angle – Magnetic angle welding tools and accessories are designed to hold metal pieces together so you can safely work with both hands. Each welding angle magnet is designed with an arrow shape to allow you to work with different angles while welding, soldering, or installing metalwork. Magnetic welding holder provides 45, 90, and 135-degree angles
- Metal Holder for Welding & Soldering – Arrow Angle Welding Magnets easily angle and hold your metal projects together before fusing the pieces together to allow hands free welding. These heavy duty powerful angle magnets stick solidly to any ferrous metal object and the bright red color will help you locate it easily. The arrow magnets can hold up to 50 lbs of weight
- Hands-Free Welding Accessories – The magnetic welding holders hold your metal pieces together at a variety of angles allowing you to work through without having to pause to move them.
- Build to Last – Constructed of high quality steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion
- Wide Variety of Applications – Whether you are welding soldering, assembly, marking off, or installing pipes, these magnetic welding holders are convenient. These tools also come in handy as a floater or to be used with a crane
-
SKU: 25997
WHEEL DOLLY 3000LB STEEL
2-piece auto wheel dolly set, great for moving cars, boats, planes and more. These are not the standard dollies you’ll see everywhere else. The four 3 in. swiveling casters allow for omni-directional movement around the garage with ball-bearing construction for maximum performance. Design includes onboard brakes to limit movement once the vehicle is in position along with a 16 in. x 12 in. diamond-plated surface to reduce the risk of slipping.
- Wheel dolly is designed for easy and 1-person movement, it is great for garage or professional use for moving vehicles with ease, it is also ideal for moving trucks and amp, cars, save space in garage and jobsites
- Wheel dolly is made from solid steel and amp, exquisite craft, so it is not easy to break or be out of shape, it also coated with powder finish for rust resistant
- 4 dual-bearing swivel casters for mobility in all directions, provide 360° and ordm, rotation and free rolling for one-person jobs
- Wheel dolly could hold weight up to 1,500 lbs. for each 1 and totally 3,000 lbs. for a set of 2, so it could move vehicles of most weight with ease
- Our wheel dolly features with 4 universal wheels for convenient movement and 2 brakes for quick stop, each dolly also has a convenient carry handle for easy transportation
- Tread of the wheel dolly is rough and sunk, so wheels are not easy to slip down from the treads, the stability could also be improved
- Material: steel
- Assembly required
- Weight capacity: 1,500 lbs. per dolly
- Caster size: 3 in.
- Size of plate: 16 in. x 12 in.
- Package contents: 2X wheel dolly car skates
