-
SKU: 40355
AIR TIRE CHUCK BRASS
Brass Plated
1/4″ NPT
Inner Pack 10
Case Pack 120 -
SKU: 41705
ANGLE DIE GRINDER 1/4″
ANGLE DIE GRINDER 1/4″
Inner Pack 1
Case Pack 6 -
SKU: 13263
ASSORTMENT NUT & BOLT 347PC ASST SAE SU
NUT & BOLT 347PC ASST SAE SU
Inner Pack 1
Case Pack 20 -
SKU: 13264
ASSORTMENT NUT & BOLT KIT 347PC MM SU
NUT & BOLT KIT 347PC MM SU
Inner Pack 1
Case Pack 20 -
SKU: 13222
ASSORTMENT ORING 419PC METRIC SU
ORING ASSORTMENT 419PC METRIC SU
Inner Pack 1
Case Pack 20 -
SKU: 20105
AUTO FRONT END SERVICE SET
High Carbon Steel Construction With A Satin Chrome Finish
Contents: Large C-Shaped Puller, Small C-Shaped Puller, Large Swing Arm Puller
Small L-Shaped Puller, Large Rocker Arm Puller
Sizes: Large C-Shaped Puller: Jaw Spread: 1-11/32″, Throat Depth: 2-1/2″
Small C-Shaped Puller: Jaw Spread: 1-1/8″, Throat Depth: 2-1/8″
Large Swing Arm Puller: Jaw Spread: 0 to 2-1/2″, Throat Depth: 3-1/4″
Small L-Shaped Puller: Jaw Spread: 3/4″, Throat Depth: 1-3/4″
Large Rocker Arm Puller: Jaw Spread: 7/8″, Throat Depth: 2-1/4″
Custom Blow Molded Case
Inner Pack 1
Case Pack 3 -
SKU: 26034
AUTO PILOT BEARING PULLER KIT
For Pulling Jobs Requiring an Internal Pull Such as Pilot Bearings
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing For Pulling Out Evenly Without Damaging Parts
Shaft: Slide Hammer Shaft 390mm Long
Hammer:2.15lb 1000mm Length
Clamps: 8~10mm (5/16″~13/32″), 10~12mm (13/32″~15/32″), 12~14mm (15/32″~9/19″), 15~17mm (9/32″~11/16″), 17~20mm (11/16″~25/32″), 20~24mm (25/32″~15/16″), 25~29mm (1″~1-1/8″), 30~32mm (1-3/16″~1-1/4″)
Custom carry cas
Inner Pack 1
Case Pack 2 -
SKU: 26201
AUTO VACUUM PURGE & COOLING SYSTEM REFILL KIT
Reduces The Refill Time of Radiator Cooling Systems
Prevents Air Flow Into The System
No More Bleeding
Saves Clean Up Time
Easy to Connect With Air Pump
Creates a Vacuum to The Filler Hose Opening The Valve and Letting The Pre-Mixed Coolant Flow Into The System
2″ Gauge
Adapter sizes: 35mm, 39mm, 44mm, 48mm
Clear Hose
Case Inner Pack 1 Case Pack 4 -
SKU: 21530
BATTERY CHARGER 12/24V 25A AUTO W/ENGINE START
Stark portable automotive battery charger has three modes, making it easy to charge, maintain or jump start 12/24 volt batteries. This automotive battery charger has built-in safety features such as reverse polarity alert, thermal protection shutoff and a self-resetting circuit breaker. Copper plated clamps offer superior conductivity.
Feature:
- Great for charging or maintaining all types of 12V and 24V lead-acid batteries
- Features with cooling fan and reliable cooling vent to disperse heat and increase charging efficiency
- Support working under wide range temperature to ensure the battery can be charged and start normally and prolong the life of battery.
- Both the power cable and battery cables are long for extended reach
- Each battery cable has heavy duty copper plated clamps
Specifications:
- Color: Black
- Housing Material: Steel
- AC power input: 12V/230W, 24V/360W
- Charge Voltage: 12-24V
- Rated Voltage: 12V/12A, 24V/10A
- Max charge current: 25A
- Battery Capacities: 20-250Ah
- Certification: CE Listed
INNER PACK 1
CASE PACK 4
-
SKU: 21523
BATTERY CHARGER 55AMP MONSTER
110V 60Hz Battey Charger For Lead-Acid Batteries
AC Input: 12V = 1400W , 24V= 2600W
Charger Voltage: 12V = 56A , 24V = 55A
Maximum Charger Current: 90A
Battery Capacities 60-600Ah
Starter Current: 600A
Built In Fan for Cooling With Automatic Thermistor Protection
Adjustable Timer For Quick Charge, Set and Forget
Ce, RoHS Certified
Perfect For Cars, Boats, Trailers, RV’s
Inner Pack 1
Case Pack 1 -
SKU: 21524
BATTERY TESTER LOAD/CHARGING SU
BATTERY TESTER LOAD/CHARGING SU
Inner Pack 1
Case Pack 10 -
SKU: 11275
BICYCLE TIRE REPAIR KIT
BICYCLE TIRE REPAIR KIT
Inner Pack 12
Case Pack 60 -
SKU: 50002
BOTTLE JACK 6 TON
This Bottle Jack lifts 6 Ton loads
Use as a hydraulic jack for changing wheels and tires
Hydraulic car jack is small and portable
Heavy duty steel construction
Paint resists dirt, grease and oil for easy clean-up
Works horizontally (pushing) and vertically (Lifting)
Piston ram screw rod is extendable and adjustable
Separate release-valve to quickly switch between raising or lowering
Knurled and heat-treated pad
Bottle jack has wide base for added stability
2 piece pump handle
Lift Capacity: 6 tons
Min. Lift Height: 7-1/2 inches
Max. Lift Height: 14 inches Inner Pack 1 Case Pack 5 -
SKU: 10020
CAR WASH CHAMOIS 43X32X0.2CM
CAR WASH CHAMOIS 43X32X0.2CM
Inner Pack 1
Case Pack 100 -
SKU: 25044
COMPRESSION GAS TESTER HD
AUTO COMPRESSION TESTER HD
Inner Pack 1
Case Pack 20 -
SKU: 250470
COMPRESSION GAS TESTER KIT
AUTO COMPRESSION TESTER KIT
Inner Pack 10
Case Pack 100 -
SKU: 26078
COMPRESSION TESTER 2.5’DIAL SU
COMPRESSION TESTER 2.5’DIAL SU
Inner Pack 1
Case Pack 50 -
SKU: 36000
DISC PAD HOLDER ROL LOCK 3IN SU
DISC PAD HOLDER ROL LOCK 3IN SU
Inner Pack 6
Case Pack 48 -
SKU: Z00010
DRILL BIT SPOT WELD 8MM
DRILL BIT SPOT WELD 8MM
Inner Pack 10
Case Pack 100 -
SKU: 66053
ENGINE STAND 1000LB
The max weight capacity of this engine stand is up to 1000 pounds. And its reinforced steel neck provides strength and eliminate flexing when supporting an engine block up to 1000 lb
Constructed of high-grade steel and built to exacting standards for quality and durability
Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
Front swivel castors allow you to move and position engine exactly where you need it
Paint is oil, grease and dirt-resistant for easy cleanup
360 degree swiveling and locking head allows easy rotation for obtaining the perfect angle position and securing it there
Heavy-gauge tubular construction with industrial-grade steel bearing casters for easy maneuverability
Mounting head has four adjustable arms with bolt holes to accommodate various load sizes
Long handle with rubber grips allows easy engine rotation
Inner Pack
Case Pack 1 -
SKU: 66054
ENGINE STAND 2000LBS FOLDING SU
ENGINE STAND 2000LBS FOLDING SU
Inner Pack 1
Case Pack 1 -
SKU: Z00012
FUNNEL 2N1 MECHAN
FUNNEL 2N1 MECHAN
Inner Pack 1
Case Pack 100 -
SKU: 47806
GREASE GUN PISTOL TYPE SU
GREASE GUN PISTOL TYPE SU
Inner Pack 1
Case Pack 12 -
SKU: 13257
HEAT SHRINK WIRE WRAP 90PC ASST SU
HEAT SHRINK WIRE WRAP 90PC ASST SU
Inner Pack 1
Case Pack 20