-
SKU: 61077L
AIR LUBRICATION KIT 10PC
- Tooluxe Lubrication Aid Kit
- 1 pc 1/2″ flexible hose with spring
- 1 pc grease injector needle
- 1 pc 1-1/2″ needle nose adapter
- 1 pc 4″ needle nose adapter
- 1 pc grease gun adapter (flat)
- 1 pc grease gun coupler
- 1 pc oil gun clamp
- 1 pc heavy duty grease gun coupler
- 1 pc 90 degree swivel grease coupler (6000 PSI)
- 1 pc 360 degree swivel grease coupler (9000 PSI)
- Includes Storage Case
-
SKU: Z08089
ALTERNATOR PULLEY SOCKET CTA
ALTERNATOR PULLEY SOCKET CTA
Inner Pack 6
Case Pack 48 -
SKU: 20105
AUTO FRONT END SERVICE SET
High Carbon Steel Construction With A Satin Chrome Finish
Contents: Large C-Shaped Puller, Small C-Shaped Puller, Large Swing Arm Puller
Small L-Shaped Puller, Large Rocker Arm Puller
Sizes: Large C-Shaped Puller: Jaw Spread: 1-11/32″, Throat Depth: 2-1/2″
Small C-Shaped Puller: Jaw Spread: 1-1/8″, Throat Depth: 2-1/8″
Large Swing Arm Puller: Jaw Spread: 0 to 2-1/2″, Throat Depth: 3-1/4″
Small L-Shaped Puller: Jaw Spread: 3/4″, Throat Depth: 1-3/4″
Large Rocker Arm Puller: Jaw Spread: 7/8″, Throat Depth: 2-1/4″
Custom Blow Molded Case
Inner Pack 1
Case Pack 3 -
SKU: CAPDPCR
AUTO PANEL CLIP & TRIM PLIERS
Length: 9.25″
Construction: Carbon Steel
Packaging type: Carded Pack
For most foreign and domestic vehicles
Angled tips access confined spaces easily
Unique two-step tip removes clips without damage
Hardened, tempered carbon steel pliers with rust-resistant black oxide finish
Spring-loaded design gives greater leverage, removing clips with a simple squeeze
Inner Pack 8
Case Pack 32 -
SKU: 26034
AUTO PILOT BEARING PULLER KIT
For Pulling Jobs Requiring an Internal Pull Such as Pilot Bearings
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing For Pulling Out Evenly Without Damaging Parts
Shaft: Slide Hammer Shaft 390mm Long
Hammer:2.15lb 1000mm Length
Clamps: 8~10mm (5/16″~13/32″), 10~12mm (13/32″~15/32″), 12~14mm (15/32″~9/19″), 15~17mm (9/32″~11/16″), 17~20mm (11/16″~25/32″), 20~24mm (25/32″~15/16″), 25~29mm (1″~1-1/8″), 30~32mm (1-3/16″~1-1/4″)
Custom carry cas
Inner Pack 1
Case Pack 2 -
SKU: 26201
AUTO VACUUM PURGE & COOLING SYSTEM REFILL KIT
Reduces The Refill Time of Radiator Cooling Systems
Prevents Air Flow Into The System
No More Bleeding
Saves Clean Up Time
Easy to Connect With Air Pump
Creates a Vacuum to The Filler Hose Opening The Valve and Letting The Pre-Mixed Coolant Flow Into The System
2″ Gauge
Adapter sizes: 35mm, 39mm, 44mm, 48mm
Clear Hose
Case Inner Pack 1 Case Pack 4 -
SKU: CAPBJS
BALl JOINT AUTO SEPARATOR 19MM
Premium CR-V steel and it had under special heat treatment,has long service life. It is exclusively used in disassembling the ball-head joint on such parts as a brake device. Car maintenance tools, in space restrictions can be directly and easily removed cross-rod ball head. After heat treatment, bolts can withstand long-term high-strength use.
Specification:
Opening Size:19mm
Range:12~50mm
Inner Pack 1
Case Pack 10 -
SKU: 27308
BALL JOINT SEPERATOR
Ball Joint Separator is used for separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles. Our ball joint separator tools are (by far) the easiest means possible for removing ball joints. This tool lets you replace old ball joints (even top-of-the-line ball joints) at a fraction of the cost, if you’re able to do the job on your own.
Adjustable for Different Size Ball Joints
Max. Opening Range: 1-1/8″ to 2-1/8″
Steel Construction with Black Oxide Pins
Comes in a Sturdy Blow Mold Case
Fork Opening Measures 7/8″
Inner Pack 1
Case Pack 10 -
SKU: CHIT012
BALL JOINT SEPERATOR 12″
BALL JOINT SEPERATOR 12″
Inner Pack 6
Case Pack 36 -
SKU: AZTBPK
BALL JOINT SEPERATOR PIT ARM 5PC HD KIT
Drop forged, heat treated and Hardened steel
Corrosion-resistant black phosphate finish for durability
Kit comes in a durable case for convenient storage
Inner Pack 1
Case Pack 10 -
SKU: 25015
BIT SET 12PT 4PC METRIC
BIT SET 12PT 4PC METRIC
Inner Pack 6
Case Pack 48 -
SKU: 22967
BOLT & NUT EXTRACTOR SET 9PC
BOLT & NUT EXTRACTOR SET 9PC
Inner Pack 6
Case Pack 48 -
SKU: 22988
BOLT & NUT EXTRACTOR SET SPIRAL TYPE 10PC
BOLT & NUT EXTRACTOR SET SPIRAL TYPE 10PC
Inner Pack 6
Case Pack 48 -
SKU: Z08088
BOSCH ALTERNATOR WRENCH CTA
BOSCH ALTERNATOR WRENCH CTA
Inner Pack 6
Case Pack 48 -
SKU: CZBAB9
BRAKE ADJUSTING TOOL CAL HAWK
BRAKE ADJUSTING TOOL CAL HAWK
Inner Pack 12
Case Pack 72 -
SKU: 25036
BRAKE BLEEDER BRAKE-O-MATIC
BRAKE BLEEDER BRAKE-O-MATIC
Inner Pack 1
Case Pack 6 -
SKU: 20749
BRAKE CALIPER KIT UNI 21PC NU
BRAKE CALIPER KIT UNI 21PC NU
Inner Pack 1
Case Pack 6 -
SKU: CAPCWK21
BRAKE CALIPER SET UNIVERSAL 21PC
Packaging Length: 13″
Packaging Type: Reusable Storage Container
Construction: Carbon Steel
CNC-machined, sandblasted high carbon steel for superior performance, reliability, and durability
Replace disc brake pads without damaging piston and boot
Left and right-handed, T-handled rotation spindle
2 – pc. magnetic T-Handle left and right-handed wind back tools
17 – pcs. piston adapters designed for European, Japanese, and American Cars
2 – pc. reaction plates easily push compress
Inner Pack 1
Case Pack 5 -
SKU: 40518A
BRAKE FLUID TESTER
- Simply and Easily Determine the Quality of your Brake Fluid
- Quickly determine percentage of moisture in brake fluid
- Measurement range: 0% – 4%
- Power supply: 1.5V “AAA” x 1 (not included)
- 5 LEDs indicating the water % in the brake fluid
- CE and RoHS Approved
- Calibrated for DOT 4 fluid only
- Compact, at only 6″ Length
-
SKU: Z01455
BRAKE PISTON CUBE
BRAKE PISTON CUBE
Inner Pack 10
Case Pack 200 -
SKU: 45239
BRAKE SPOON IMP LG OEM
BRAKE SPOON IMP LG OEM
Inner Pack 12
Case Pack 72 -
SKU: 45238
BRAKE SPOON IMP SM OEM
BRAKE SPOON IMP SM OEM
Inner Pack 12
Case Pack 72 -
SKU: 86114
BRAKE SPREADER TOOL
BRAKE SPREADER TOOL
Inner Pack 8
Case Pack 24 -
SKU: CZBST
BRAKE SPRING TOOL CH
BRAKE SPRING TOOL CH
Inner Pack 12
Case Pack 72