-
SKU: 20105
AUTO FRONT END SERVICE SET
High Carbon Steel Construction With A Satin Chrome Finish
Contents: Large C-Shaped Puller, Small C-Shaped Puller, Large Swing Arm Puller
Small L-Shaped Puller, Large Rocker Arm Puller
Sizes: Large C-Shaped Puller: Jaw Spread: 1-11/32″, Throat Depth: 2-1/2″
Small C-Shaped Puller: Jaw Spread: 1-1/8″, Throat Depth: 2-1/8″
Large Swing Arm Puller: Jaw Spread: 0 to 2-1/2″, Throat Depth: 3-1/4″
Small L-Shaped Puller: Jaw Spread: 3/4″, Throat Depth: 1-3/4″
Large Rocker Arm Puller: Jaw Spread: 7/8″, Throat Depth: 2-1/4″
Custom Blow Molded Case
Inner Pack 1
Case Pack 3 -
SKU: 26034
AUTO PILOT BEARING PULLER KIT
For Pulling Jobs Requiring an Internal Pull Such as Pilot Bearings
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing For Pulling Out Evenly Without Damaging Parts
Shaft: Slide Hammer Shaft 390mm Long
Hammer:2.15lb 1000mm Length
Clamps: 8~10mm (5/16″~13/32″), 10~12mm (13/32″~15/32″), 12~14mm (15/32″~9/19″), 15~17mm (9/32″~11/16″), 17~20mm (11/16″~25/32″), 20~24mm (25/32″~15/16″), 25~29mm (1″~1-1/8″), 30~32mm (1-3/16″~1-1/4″)
Custom carry cas
Inner Pack 1
Case Pack 2 -
SKU: 26201
AUTO VACUUM PURGE & COOLING SYSTEM REFILL KIT
Reduces The Refill Time of Radiator Cooling Systems
Prevents Air Flow Into The System
No More Bleeding
Saves Clean Up Time
Easy to Connect With Air Pump
Creates a Vacuum to The Filler Hose Opening The Valve and Letting The Pre-Mixed Coolant Flow Into The System
2″ Gauge
Adapter sizes: 35mm, 39mm, 44mm, 48mm
Clear Hose
Case Inner Pack 1 Case Pack 4 -
SKU: 11275
BICYCLE TIRE REPAIR KIT
BICYCLE TIRE REPAIR KIT
Inner Pack 12
Case Pack 60 -
SKU: 21513
BOSTER CABLES 10GAUGE 12FT
12FT 10 Gauge Power Jumper Cable Starter Booster Cable 200AMP
Specifications:
- For Car, Van, Truck, RV, Boat, Camper, Etc
- Thick & durable construction
- Copper plated jaws
- Fully shielded clamps
- 200 AMP
- Tangle Free
- Able to Fits top & side post battery terminals
- Color coded cables Red Black for +/-Terminals
Package Contains:
- 1 x 200AMP 12FT Jump Cabl
-
SKU: 50002
BOTTLE JACK 6 TON
This Bottle Jack lifts 6 Ton loads
Use as a hydraulic jack for changing wheels and tires
Hydraulic car jack is small and portable
Heavy duty steel construction
Paint resists dirt, grease and oil for easy clean-up
Works horizontally (pushing) and vertically (Lifting)
Piston ram screw rod is extendable and adjustable
Separate release-valve to quickly switch between raising or lowering
Knurled and heat-treated pad
Bottle jack has wide base for added stability
2 piece pump handle
Lift Capacity: 6 tons
Min. Lift Height: 7-1/2 inches
Max. Lift Height: 14 inches Inner Pack 1 Case Pack 5 -
SKU: 13232
CAR FUSE KIT MINI 120PC
- Assorted 5A, 10A, 15A, 20A, 25A, 30A Car Fuses+
-
SKU: 10020
CAR WASH CHAMOIS 43X32X0.2CM
CAR WASH CHAMOIS 43X32X0.2CM
Inner Pack 1
Case Pack 100 -
SKU: 25044
COMPRESSION GAS TESTER HD
AUTO COMPRESSION TESTER HD
Inner Pack 1
Case Pack 20 -
SKU: 250470
COMPRESSION GAS TESTER KIT
AUTO COMPRESSION TESTER KIT
Inner Pack 10
Case Pack 100 -
SKU: 26078
COMPRESSION TESTER 2.5’DIAL SU
COMPRESSION TESTER 2.5’DIAL SU
Inner Pack 1
Case Pack 50 -
SKU: 25094
COMPRESSOR COIL SPRING 10″
Remove coil spring to replace or repair shock absorbers, spring set struts, ect
Drop Forged
Heat Treated Steel
Set of 2 Spring Compressor
Chrome Plated Compressor Jaws
Precision Machined Steel Bolts
Permits Quick and Safe Removal or Installation of Springs
Zinc Plated Compressor Fit Most Macpherson Strut Sizes
Inner Pack 1
Case Pack 10 -
SKU: 47806
GREASE GUN PISTOL TYPE SU
GREASE GUN PISTOL TYPE SU
Inner Pack 1
Case Pack 12 -
SKU: 21180
TIRE INFLATOR DIGITAL PORTABLE
Stark Portable 12 Volt Inflator with Gauge has a powerful motor that gets the job done quickly at 1.06 CFM, and can fill a flat tire within minutes without the excess noise and vibration of other inflator models on the market. Keep it in the back of your trunk as part of your emergency roadside kit, or keep it in your garage to fill car, truck, bike, trailer, and RV tires and other sports, exercise, or camping equipment.
- Additional attachment nozzles you would be hard pressed to find something that this compressor cannot inflate, from the heavy-duty, like car tires, to the delicate, such as a beach ball, it is perfectly equipped to achieve the perfect pressure for any situation, outdoors or indoors
- Air pump will automatically turn off when it reaches its preset value. It is connected via a 12-Volt port to the vehicles cigarette lighter port and the pump itself has a long enough cord to reach all of your vehicles tires
- Digital display is easy to read and illuminates even in the dark for ease of use in whatever environment you might get a puncture
- Pack with a 120-Watt powerful metal motor delivers inflation at a rate of 30 L/min, inflating a tire rated at 30 psi in 3-minutes
- Premium material protector to guard display screen and durable metal body grounded by anti-vibration rubber feet to prevent unwanted movement
- Working voltage: DC 12-Volt
- Rating power: 120-Watt
- Inflating speed: 1.06 cfm
- Min. Amp: 10 Amp
- Maximum Amp: 15 Amp
- LED flashlight: bright torch
- Display unit: KPA, PSI, BAR, KG/CM
- Overall Dimension: 4 in. W x 8 in. L x 6-3/4 in. H
- Package content: air compressor, adapter set, ball needle, spare fuse, manual
-
SKU: 25997
WHEEL DOLLY 3000LB STEEL
2-piece auto wheel dolly set, great for moving cars, boats, planes and more. These are not the standard dollies you’ll see everywhere else. The four 3 in. swiveling casters allow for omni-directional movement around the garage with ball-bearing construction for maximum performance. Design includes onboard brakes to limit movement once the vehicle is in position along with a 16 in. x 12 in. diamond-plated surface to reduce the risk of slipping.
- Wheel dolly is designed for easy and 1-person movement, it is great for garage or professional use for moving vehicles with ease, it is also ideal for moving trucks and amp, cars, save space in garage and jobsites
- Wheel dolly is made from solid steel and amp, exquisite craft, so it is not easy to break or be out of shape, it also coated with powder finish for rust resistant
- 4 dual-bearing swivel casters for mobility in all directions, provide 360° and ordm, rotation and free rolling for one-person jobs
- Wheel dolly could hold weight up to 1,500 lbs. for each 1 and totally 3,000 lbs. for a set of 2, so it could move vehicles of most weight with ease
- Our wheel dolly features with 4 universal wheels for convenient movement and 2 brakes for quick stop, each dolly also has a convenient carry handle for easy transportation
- Tread of the wheel dolly is rough and sunk, so wheels are not easy to slip down from the treads, the stability could also be improved
- Material: steel
- Assembly required
- Weight capacity: 1,500 lbs. per dolly
- Caster size: 3 in.
- Size of plate: 16 in. x 12 in.
- Package contents: 2X wheel dolly car skates