-
SKU: 13043
AIR COMPRESSSOR ACCESSORY KIT 14PC
AIR COMPRESSSOR ACCESSORY KIT 14PC
Inner Pack 6
Case Pack 12 -
SKU: CHIH310
AIR HORN 12V PITBULL
AIR HORN 12V PITBULL
Inner Pack 1
Case Pack 6 -
SKU: 40355
AIR TIRE CHUCK BRASS
Brass Plated
1/4″ NPT
Inner Pack 10
Case Pack 120 -
SKU: Z08089
ALTERNATOR PULLEY SOCKET CTA
ALTERNATOR PULLEY SOCKET CTA
Inner Pack 6
Case Pack 48 -
SKU: 41705
ANGLE DIE GRINDER 1/4″
ANGLE DIE GRINDER 1/4″
Inner Pack 1
Case Pack 6 -
SKU: 13263
ASSORTMENT NUT & BOLT 347PC ASST SAE SU
NUT & BOLT 347PC ASST SAE SU
Inner Pack 1
Case Pack 20 -
SKU: 13264
ASSORTMENT NUT & BOLT KIT 347PC MM SU
NUT & BOLT KIT 347PC MM SU
Inner Pack 1
Case Pack 20 -
SKU: 13222
ASSORTMENT ORING 419PC METRIC SU
ORING ASSORTMENT 419PC METRIC SU
Inner Pack 1
Case Pack 20 -
SKU: Z00112
AUTO BODY HAND SANDER
AUTO BODY HAND SANDER
Inner Pack 1
Case Pack 12 -
SKU: 20105
AUTO FRONT END SERVICE SET
High Carbon Steel Construction With A Satin Chrome Finish
Contents: Large C-Shaped Puller, Small C-Shaped Puller, Large Swing Arm Puller
Small L-Shaped Puller, Large Rocker Arm Puller
Sizes: Large C-Shaped Puller: Jaw Spread: 1-11/32″, Throat Depth: 2-1/2″
Small C-Shaped Puller: Jaw Spread: 1-1/8″, Throat Depth: 2-1/8″
Large Swing Arm Puller: Jaw Spread: 0 to 2-1/2″, Throat Depth: 3-1/4″
Small L-Shaped Puller: Jaw Spread: 3/4″, Throat Depth: 1-3/4″
Large Rocker Arm Puller: Jaw Spread: 7/8″, Throat Depth: 2-1/4″
Custom Blow Molded Case
Inner Pack 1
Case Pack 3 -
SKU: CAPDPCR
AUTO PANEL CLIP & TRIM PLIERS
Length: 9.25″
Construction: Carbon Steel
Packaging type: Carded Pack
For most foreign and domestic vehicles
Angled tips access confined spaces easily
Unique two-step tip removes clips without damage
Hardened, tempered carbon steel pliers with rust-resistant black oxide finish
Spring-loaded design gives greater leverage, removing clips with a simple squeeze
Inner Pack 8
Case Pack 32 -
SKU: 26034
AUTO PILOT BEARING PULLER KIT
For Pulling Jobs Requiring an Internal Pull Such as Pilot Bearings
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing For Pulling Out Evenly Without Damaging Parts
Shaft: Slide Hammer Shaft 390mm Long
Hammer:2.15lb 1000mm Length
Clamps: 8~10mm (5/16″~13/32″), 10~12mm (13/32″~15/32″), 12~14mm (15/32″~9/19″), 15~17mm (9/32″~11/16″), 17~20mm (11/16″~25/32″), 20~24mm (25/32″~15/16″), 25~29mm (1″~1-1/8″), 30~32mm (1-3/16″~1-1/4″)
Custom carry cas
Inner Pack 1
Case Pack 2 -
SKU: 26201
AUTO VACUUM PURGE & COOLING SYSTEM REFILL KIT
Reduces The Refill Time of Radiator Cooling Systems
Prevents Air Flow Into The System
No More Bleeding
Saves Clean Up Time
Easy to Connect With Air Pump
Creates a Vacuum to The Filler Hose Opening The Valve and Letting The Pre-Mixed Coolant Flow Into The System
2″ Gauge
Adapter sizes: 35mm, 39mm, 44mm, 48mm
Clear Hose
Case Inner Pack 1 Case Pack 4 -
SKU: CAPBJS
BALl JOINT AUTO SEPARATOR 19MM
Premium CR-V steel and it had under special heat treatment,has long service life. It is exclusively used in disassembling the ball-head joint on such parts as a brake device. Car maintenance tools, in space restrictions can be directly and easily removed cross-rod ball head. After heat treatment, bolts can withstand long-term high-strength use.
Specification:
Opening Size:19mm
Range:12~50mm
Inner Pack 1
Case Pack 10 -
SKU: 27308
BALL JOINT SEPERATOR
Ball Joint Separator is used for separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles. Our ball joint separator tools are (by far) the easiest means possible for removing ball joints. This tool lets you replace old ball joints (even top-of-the-line ball joints) at a fraction of the cost, if you’re able to do the job on your own.
Adjustable for Different Size Ball Joints
Max. Opening Range: 1-1/8″ to 2-1/8″
Steel Construction with Black Oxide Pins
Comes in a Sturdy Blow Mold Case
Fork Opening Measures 7/8″
Inner Pack 1
Case Pack 10 -
SKU: CHIT012
BALL JOINT SEPERATOR 12″
BALL JOINT SEPERATOR 12″
Inner Pack 6
Case Pack 36 -
SKU: AZTBPK
BALL JOINT SEPERATOR PIT ARM 5PC HD KIT
Drop forged, heat treated and Hardened steel
Corrosion-resistant black phosphate finish for durability
Kit comes in a durable case for convenient storage
Inner Pack 1
Case Pack 10 -
SKU: 24367
BATTERY AND ALTERNATOR TESTER OEM
OEM ALTERNATOR AND BATTERY TESTER
Inner Pack 6
Case Pack 48 -
SKU: 21530
BATTERY CHARGER 12/24V 25A AUTO W/ENGINE START
Stark portable automotive battery charger has three modes, making it easy to charge, maintain or jump start 12/24 volt batteries. This automotive battery charger has built-in safety features such as reverse polarity alert, thermal protection shutoff and a self-resetting circuit breaker. Copper plated clamps offer superior conductivity.
Feature:
- Great for charging or maintaining all types of 12V and 24V lead-acid batteries
- Features with cooling fan and reliable cooling vent to disperse heat and increase charging efficiency
- Support working under wide range temperature to ensure the battery can be charged and start normally and prolong the life of battery.
- Both the power cable and battery cables are long for extended reach
- Each battery cable has heavy duty copper plated clamps
Specifications:
- Color: Black
- Housing Material: Steel
- AC power input: 12V/230W, 24V/360W
- Charge Voltage: 12-24V
- Rated Voltage: 12V/12A, 24V/10A
- Max charge current: 25A
- Battery Capacities: 20-250Ah
- Certification: CE Listed
INNER PACK 1
CASE PACK 4
-
SKU: 21523
BATTERY CHARGER 55AMP MONSTER
110V 60Hz Battey Charger For Lead-Acid Batteries
AC Input: 12V = 1400W , 24V= 2600W
Charger Voltage: 12V = 56A , 24V = 55A
Maximum Charger Current: 90A
Battery Capacities 60-600Ah
Starter Current: 600A
Built In Fan for Cooling With Automatic Thermistor Protection
Adjustable Timer For Quick Charge, Set and Forget
Ce, RoHS Certified
Perfect For Cars, Boats, Trailers, RV’s
Inner Pack 1
Case Pack 1 -
SKU: 21524
BATTERY TESTER LOAD/CHARGING SU
BATTERY TESTER LOAD/CHARGING SU
Inner Pack 1
Case Pack 10 -
SKU: 27119
BEARING & SEAL RACE INSTALLER OEM
BEARING & SEAL RACE INSTALLER OEM
Inner Pack 1
Case Pack 6 -
SKU: CAPBS
BEARING SEPARATOR SMALL
Solid steel, black oxide finish
Designed for use on jobs where space does not permit the use of puller jaws directly behind the part to be removed
Capacity: 2-1/4″
Length: 4″
Threads: 3/8″ (16 TPI)
Inner Pack 6
Case Pack 48 -
SKU: BAPBS2P
BEARING SEPERATOR 2PC SET
All high carbon steel that has been heat treated
Contents includes: 2″ and 3″, bearing splitters along with pulling components to safely remove bearings.
4 sets of hex push-puller legs 2-pc. 4″ and 2-pc. 5″ extension legs. 1-pc. 6″ yoke with center adapter.
1-pc. bar-type puller head with 9/16″ forcing screw ragged drop forged construction.Inner Pack 1
Case Pack 2